Formaldehyde is categorized by REACH (Regulation for Registration, Evaluation, Authorization, and Restriction of Chemicals) as a substance of very high concern (SVHC), and the use of this highly carcinogenic chemical is tightly restricted worldwide.
In order to have your products allowed on the market, they must be certified as being compliant with REACH and other international consumer health directives. To this end, manufacturers must use formaldehyde testing laboratories.
Formaldehyde is a highly toxic biocide which can cause severe burns and result in death if swallowed, inhaled or coming into contact with the skin. It is colorless, flammable, and has a pungent smell.
Products containing formaldehyde must be labeled with information about concentration of formaldehyde
as well as warning symbols indicating the health hazards they pose.
While it is a hazardous substance, formaldehyde is also a highly versatile chemical, and it is used in a variety of ways in a vast range of manufacturing processes. For example, various forms of formaldehyde (liquid or gas) are used to manufacture resins, disinfectants and fixatives. It’s also used as a preservative in consumer products.
Uses of formaldehyde as a biocide:Formaldehyde (methanal) is registered under the European health and safety directive REACH and classified under the following hazard class and category codes:
Any use of formaldehyde in mixtures, the presence of formaldehyde in any item (product) or its potential to release formaldehyde is limited to a concentration of 0.1%.
For clothing and textiles that are designed to be in contact with human skin, REACH set the limit of formaldehyde content to 0.0075% (or 75mg/kg)
Products are categorized based on their potential to release formaldehyde into the environment over time, both indoors and outdoors.
Testing products as formaldehyde releasersThere are many products with the potential for releasing formaldehyde into indoor air; these include pressed wood products, insulation foams, and textile.
Most indoor sources of formaldehyde do not contain formaldehyde as such but can emit the toxin as a product of hydrolysis, referred to as “secondary emissions”, which may occur over multiple days or months.
Formaldehyde testing laboratories use a variety of methods to measure formaldehyde emissions, depending on the type of product being tested and the type of formaldehyde used in the manufacturing process, or the type of formaldehyde that may potentially be released by the product.
The tests are designed to determine the following:
These various tests reveal how much formaldehyde is contained in the product and determine the extent to which formaldehyde is captured and analyzed, or hidden. For some liquid products, such as detergents, formaldehyde is released slowly until the liquid is spread out on a surface.
Free Formaldehyde Content TestDetermines actual concentration of formaldehyde in the product as well as determining how much formaldehyde can be released during the product’s lifetime.
Total Formaldehyde TestsMeasures the release of all potentially formed formaldehyde emissions at once.
Emissions Chamber Tests – CEN/TS 16516CEN/TS 16516 is a series of ISO 16000-standard horizontal VOC emissions testing methods – very similar to the European standard ‘EN 717-1 Chamber method’ – and includes the following:
The samples are tested in a sealed test chamber to determine the concentration of formaldehyde in the indoors air after a certain elapsed time, serving as an indicator for long-term indoor air exposure.
The standard formaldehyde emissions limit is 0.1 parts per million (ppm).
The emissions testing period varies depending on the product and destination market:
Restrictions governing the use and emissions of formaldehyde and other chemicals sold in consumer products in the European Union became law in 2007 as REACH.
Similar directives have been adopted by other countries around the world since 2007.
REACH directives require any organization producing, supplying, distributing, importing, using or placing a substance, mixture or article on the EU market to be responsible for ensuring that it is in compliance with REACH regulations.
The burden of proof of compliance with REACH regulations is on the manufacturer, who must identify and manage the risks linked to the substances they manufacture and market in the EU.
As such, manufacturers and producers are compelled to demonstrate to the ECHA how the substance can be safely used, and they must communicate the risk management measures to the users.
The CE mark is required on almost all products sold in the EU which could contain hazardous chemicals. Only products that comply with REACH are allowed to display the ‘CE’ mark, which shows that the manufacturer has checked that the products meet EU safety, health or environmental requirements.
QIMA provides on-site ISO standard testing for formaldehyde, as well as laboratory testing facilities for formaldehyde in Asia, Europe and Americas.
Transparent Results and Affordable Prices.We’ll advise you on the appropriate tests for your product and your destination market.
Samples are taken at source or from batches of the actual product to ensure transparency in the selection testing procedure and guarantee accurate results.
We’ll determine appropriate tests for your product sample and destination market, keeping your testing costs as low as possible.
Certification for labelingOur formaldehyde testing laboratories are qualified to certify products with the labels required by the Classification Labeling and Packaging (CLP) of substances and mixtures regulations issued by the European Commission’s Health & Safety Authority.
Click here to contact us and learn more about our laboratory locations and get an instant quote or information on how we can help you customize your formaldehyde testing.
Thank you - your inquiry has been sent.
We will come back to you shortly.
Back
This site is protected by copyright and trademark laws under US and international law. |
QIMA © 2024 |
ClientID:; Client:; Affiliate:;
|